CONVEYORS AND VALVES

Belt Conveyor TBA

TARMA TBA's range of conveyors can be designed with belt widths up to 2,000 mm and numerous applications and layouts. The belt conveyor range has capacities of up to 6,500 m3/h and lengths of over 5 km.

Bandabord Belt Conveyor TBB

The TARMA TBB bandabord belt conveyor is specially designed for vertical conveying and steep inclines. This type of belt is capable of conveying material sizes of up to 450 mm in diameter and heights of over 100 m. The capacity of this equipment can reach over 2,000 m3/h.

Pan Conveyor TCB

The TARMA TCB chain conveyor with trays is an equipment specially designed for conveying materials with a high temperature, up to 450ºC. This range of equipment has chains from 350 kN to 2,100 kN breaking load, widths from 600 mm to 1,600 mm and capacities up to 1,000 ^m3/h.

Bucket Conveyor TCC

The TARMA TCC bucket chain conveyor is an equipment specially designed for conveying materials with a high temperature, up to 450ºC and capable of elevating the material at inclines of up to 60º. The rangeof equipment has chains from 350 kN to 2,100 kN breaking load, widths from 600 mm to 1,600 mm and capacities up to 1,000 ^m3/h.

Pivoting Chain Conveyor TCP

The TARMA TCP pivoting chain conveyor is an equipment specially designed for conveying materials with a high temperature, up to 450ºC, and has the capacity to discharge at intermediate points. This range of equipment has chains from 350 kN to 1,200 kN breaking load, widths from 600 mm to 1,200 mm and capacities up to 500 ^m3/h.

Straight or Curved Fine Reclaimer RFR / RFC

The curved fines reclaimer is an auxiliary equipment designed to complement other machines. Positioned to fit in with the rest, this equipment is capable of collecting materials that have been rejected (by bouncing or overflowing) from the main flow, collecting them at the discharge point and returning them to the conveying channel.

Double By-pass ADS

The double outlet actuator is used to guide solids through two independent lines alternately. With widths from 300 to 1,400 mm and flow rates up to 3,000 ^m3/h.

Triple By-pass ATS

The triple outlet by-pass is used to guide solids through three independent lines alternately. With widths from 300 to 1,400 mm and flow rates up to 3,000 m3/h.